Committed to providing one-stop solutions for our customers
After-Sales Service
Principle
Customer satisfaction as the first principle
Quick response
Fast problem solving
After-sales service efficiency
Customer Feedback 30min Response
Solution 120min Issued
On-site support 6-12 hours
After-sales service commitment
One year warranty on electronic components, one to three years warranty on the body
Lifetime warranty
Except for man-made reasons
After-sales team strength
Number of service teams 10+ Changchun, Wuhan, Chongqing, Changsha, Guangzhou, etc.
Resident after-sales personnel and spare parts in key regions
Technical support
Free training
Technological Innovation
Patented locking technology
One locking guarantee: safety platform; two locking guarantee: reset spring, up to 10 times the load of the locking force of the double air-break insurance structure
Patented drip-free fluid connectors
Multi-energy: gas and liquid patented drip-free design, extremely high stability, breaking foreign monopolies
Cat3 safety rated electrical features
One generation ahead of its peers, the quick-change control safety system performance level d category3 is T?V certified.
Autonomous high insertion and extraction life probes
High lifespan: max1 million times; multiple types: high and low voltage, strong and weak power, network, vision, servo signal...
Dear customer, Thank you very much for choosing Qiaotian products and services. After receiving the feedback of the problem, we will deal with it and contact you as soon as possible.
After-sales Enquiry and Complaint Hotline：400-1033-880
High-speed unidirectional cutting design shortens single dressing time within 2 seconds without reverse deburring, fully matching high-speed production takt.
High-speed unidirectional cutting design shortens single dressing time within 2 seconds without reverse deburring, fully matching high-speed production takt.
QCore protection functions
Standard equipped with electric leakage, overload and phase sequence protection as well as tool rotation monitoring to ensure safe operation.
Standard equipped with electric leakage, overload and phase sequence protection as well as tool rotation monitoring to ensure safe operation.
QPractical value of head floating function
Wear-induced length difference between upper and lower electrodes can be automatically compensated by ±20mm floating travel. It realizes uniform stress distribution during simultaneous dressing and eases mechanical impact on welding guns and grinders.
Wear-induced length difference between upper and lower electrodes can be automatically compensated by ±20mm floating travel. It realizes uniform stress distribution during simultaneous dressing and eases mechanical impact on welding guns and grinders.
QAvailable installation postures
Support horizontal, vertical and upward vertical installation to adapt to complex on-site layout.
Support horizontal, vertical and upward vertical installation to adapt to complex on-site layout.
QAdvantages of horizontal installation
Under vertical installation, blown copper chips tend to scatter on the ground due to gravity and cannot be fully collected. Horizontal installation achieves the highest chip collection rate and keeps workshops cleaner.
Under vertical installation, blown copper chips tend to scatter on the ground due to gravity and cannot be fully collected. Horizontal installation achieves the highest chip collection rate and keeps workshops cleaner.
QRecommended dressing pressure and limit value
Recommended pressure range: 500N~1200N. Safety warning: Pressure over 1500N may cause equipment shutdown or component damage; pressure exceeding 2450N must be reduced. Lower pressure is suggested for shaped electrodes and new tools during commissioning.
Recommended pressure range: 500N~1200N. Safety warning: Pressure over 1500N may cause equipment shutdown or component damage; pressure exceeding 2450N must be reduced. Lower pressure is suggested for shaped electrodes and new tools during commissioning.
QEnd face spacing requirement for electrode caps
The distance from electrode end face to tool bottom shall be more than 10mm. Custom tools are required if the distance is less than 10mm.
The distance from electrode end face to tool bottom shall be more than 10mm. Custom tools are required if the distance is less than 10mm.
QMax adaptable dressing angle for angled electrodes
Standard tools support dressing angles within 15°. Custom exclusive tools are needed for special-shaped welding guns beyond this range.
Standard tools support dressing angles within 15°. Custom exclusive tools are needed for special-shaped welding guns beyond this range.
